The DKA-45 is a robust strain link transducer that can be attached to ist base by screws. The device can be used for indirect strength measuring and the extension of machine elements and components in a rough environment.

The installation is most simple by merely mounting the sensor with two M10 bolts to a plain surface of the material. The connection cable is protected by a kick firm spiroband.

The device can be used for monitoring forces at country and building machines, metering the filling level and recording the extension at machine elements. The temperature behaviours and translation factor are dependent on geometry and material mating of sensor and component.

The calibration of the sensor is made by applying of the component with known strength. The DKA-45 are or also with an external amplifier for 1 and 9 mA or 4 and 20 mA output current available.

By a suitable choice of the zero point in the unloaded state the recording of extension, compression or both is possible. Being able to into combination with different comparators to trigger switching processes by thresholds eligible for office.

The following further features are for indicating the there DKA-45:
passive surface strain sensor with full bridge, for cyclical applications, suitable for strain measurements on rigid structures, sensor exchange w/o recalibration.