The force transducer works after the principle of the force measurement in the direction of the longitudinal axis.

Tractive forces are able to do it in lifts, cranes, gondolas as well as bracings at masts, towers, platforms and a. m. are registered.

The force transducer ZKAG-10 is a joint eye with a left-hand thread M10.

The application room for the strain gauges (dms) is protected by a rectangular case which is poured with a highly elastic mass before mechanical and chemical damages.

The strain gauge full bridges measures the elongation and transverse strain which is caused of tractive forces on the sensor.

An external amplifier produce the measuring signal of 4 - 20 mA. Optionally other electric executions are also possible.

A tare load can be stored by switching of the zero comparison signal on "Low".

The ZKAG-10 is planned for the direct connection with an automatic control or a controlling switch.