Applications & Information
The force transducer works according to the bending force measurement principles.
The SKA-24 is designed for application at conveyor scales, bin-type weighing devices, platform scales and overhead conveyor scales, but can also used for measuring the powers applied on machine parts, levers, axles etc.
The device has been designed as a bending beam with two measuring cells. Due to the beam shape and two 11 mm size boreholes, all machine building requirements will be met when mounting this component.
The force transfer is carried through by use of a borehole Ø 12 mm (forked introduction).
The measuring cell for the strain gauge has been cast with a high-elastic compound and is thus protected against mechanical or chemical damages.
The strain gauge bridges measure the caused deformation in the measuring cell due to the bending powers at the beam. The strap balance is 1,5 mV / V.
The SKA-24 is assigned for the coupling to an amplifier.
download data sheet (example):
SKA-24 version 1 (Sorry, work in progress.)
SKA-24 old version (in revision)